Brake Control Power Supply Assembly

BRAKE CONTROL POWER SUPPLY ASSY
REPLACEMENT
1. REMOVE REAR SEAT CUSHION ASSY
2. REMOVE DECK TRIM SIDE PANEL ASSY RH

HINT: Refer to the procedures from the removal of the rear door scuff plate RH up until the removal of the deck trim side panel assy RH.

3. REMOVE BRAKE CONTROL POWER SUPPLY ASSY





a) Disconnect the connector and remove the 3 bolts and the brake control power supply assy.
4. INSTALL BRAKE CONTROL POWER SUPPLY ASSY





a) Install the brake control power supply assy with the 3 bolts.
Torque: 19 Nm (194 kgf-cm, 14 ft. lbs.)
b) Connect the connector to the brake control power supply assy.
5. INSTALL DECK TRIM SIDE PANEL ASSY RH
6. INSTALL REAR SEAT CUSHION ASSY
7. CHECK AND CLEAR DTC