Radiator - Hybrid Drive: Service and Repair

Part 1 Of 3:

Part 2 Of 3:

Part 3 Of 3:

NO.2 RADIATOR ASSY (1NZ-FXE)
REPLACEMENT
1. REMOVE FAN ASSY W/MOTOR





2. REMOVE NO.2 RADIATOR ASSY
a. Remove the 3 bolts and radiator support upper RH.
b. Remove the 3 bolts and radiator support upper LH.
c. Remove the 3 bolts and radiator support lower RH.
d. Remove the 3 bolts and radiator support lower LH.
e. Remove the radiator assembly No. 2 from the vehicle.





3. REMOVE RADIATOR FAN TEMPERATURE SWITCH
a. Using SST, remove the radiator fan temperature switch.
SST 09817-33190





4. INSTALL RADIATOR FAN TEMPERATURE SWITCH
a. Using SST, install the radiator fan temperature switch.
SST 09817-33190
Torque: 7.0 Nm (71 kgf-cm, 62 inch lbs.)





5. INSTALL NO.2 RADIATOR ASSY
a. Install the radiator assembly No. 2 to the vehicle.
b. Install the radiator support lower LH with the 3 bolts.
Torque:
5.0 Nm (51 kgf-cm, 44 inch lbs.) for bolt A
3.9 Nm (40 kgf-cm, 35 inch lbs.) for bolt B
c. Install the radiator support lower RH with the 3 bolts.
Torque:
5.0 Nm (51 kgf-cm, 44 inch lbs.) for bolt A
3.9 Nm (40 kgf-cm, 35 inch lbs.) for bolt B
d. Install the radiator support upper LH with the 3 bolts.
Torque:
5.0 Nm (51 kgf-cm, 44 inch lbs.) for bolt A
3.9 Nm (40 kgf-cm, 35 inch lbs.) for bolt B
e. Install the radiator support upper RH with the 3 bolts.
Torque:
5.0 Nm (51 kgf-cm, 44 inch lbs.) for bolt A
3.9 Nm (40 kgf-cm, 35 inch lbs.) for bolt B
6. INSTALL FAN ASSY W/MOTOR