Maintenance Indicator Reset
Engine Oil Replacement Reminder Light Light
This light reminds you when to replace the engine oil.
This light will come on when the "IG- ON" mode is enabled, and will go off after about a few seconds.
When you drive for about 7200 km (4500 miles) after engine oil replacement, this light illuminates for about 3 seconds and then flashes for about 12 seconds when the hybrid system is in the "IG- ON" mode. If you continue driving without engine oil replacement, and if the driving range exceeds 8000 km (5000 miles), the light will come on after the "IG-ON" mode is enabled. The light will remain on thereafter.
If the light is flashing, we recommend that you replace the engine oil at an early opportunity depending on the driving and road conditions. If the light comes on, replace the oil as soon as possible.
The system must be reset after the engine oil replacement. Reset the system by the following procedure:
1. Press the "POWER" switch to the OFF" mode with the odometer reading shown.
2. Press the "POWER" switch twice to select the "IG-ON" mode while holding down the trip meter reset button.
Hold down the button for at least 5 seconds. The odometer indicates "000000" and the light goes off.
If the system fails to reset, the light will remain flashing.
Navigation Maintenance Item Data (If equipped)
This system has a function which informs you of the time to replace certain parts or components as well as other information shown on the screen. When the system begins operating after reaching either the information items date or driving distance, the "information" screen will be displayed.
To avoid seeing the "information" screen again, touch the "Do not display this message again" switch.
Setting Maintenance Information
1. Push the "INFO" button to display the "Information Menu" screen, and then touch the "Maintenance" switch.
2. Touch your desired icon and input the conditions.
Date: Input the next maintenance date.
Distance: Input the driving distance until the next maintenance check. You can input up to five digits for the driving distance.
When you touch the "Personal Event" switch on the "Maintenance" screen, the screen changes to the "Personal Event" screen. Touch the keys to input your desired name and then input the conditions.
After you input the information, touch the "OK" switch. The screen returns to the "Maintenance" screen. The icon color will change to green after the date and driving distance are input. The icon color will change to orange when your vehicle needs to be serviced. The following switches appear on the "Maintenance" screen.
1. Delete all: Cancel all conditions which have been input.
2. Reset all: Reset all items which satisfy either condition.
Touch the "OFF" switch on the "Maintenance" screen, and the "Information" screen will no longer be displayed.
Note:
- For scheduled maintenance information, please refer to the Scheduled maintenance guide or Owners manual supplement.
- Depending on your driving or the road conditions, the system may have a time-lag between the data which has been input and the actual date and driving distance.