Release Method of Activation Prevention Mechanism

ACTIVATION PREVENTION MECHANISM

a. An activation prevention mechanism is built into the connector (airbag ECU assy side) of the SRS airbag system squib circuit to prevent accidental airbag activation.
b. This mechanism closes the circuit when the connector is disconnected by bringing the short spring into contact with the terminal and shutting off external electricity of prevent accidental SRS airbag activation.
c. To release the activation prevention mechanism, insert a piece of paper with the same thickness as the male terminal between the terminal and the short spring to break the connection.

Part 1:

Part 2:

d. Refer to the illustrations concerning connectors utilizing the activation prevention mechanism and its release method.

CAUTION: Never release the activation prevention mechanism on the squib connector.

NOTE:
- Do not release the activation prevention mechanism unless specifically directed by the troubleshooting procedure.
- To prevent the terminal and the short spring from being damaged, always use a piece of paper with the same thickness as the male terminal.