Airbag Sensor Rear

VEHICLE NOT INVOLVED IN COLLISION
a. Perform a diagnostic system check.

VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Perform a diagnostic system check.
b. When the quarter panel of the vehicle or its periphery is damaged, check if there is any damage to the airbag sensor rear. If there are any defects as mentioned below, replace the airbag sensor rear with a new one:
- Cracks, dents or chips in the case.
- Cracks or other damage to the connector.
- Peeling off of the label or damage to the serial number.

CAUTION: For removal and installation procedures of the airbag sensor rear, and be sure to follow the correct procedure.

VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED
a. Replace the airbag sensor rear.

CAUTION: For removal and installation procedures of the airbag sensor rear, and be sure to follow the correct procedure.