Steering Angle Sensor: Service and Repair

STEERING SENSOR
REPLACEMENT
1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE STEERING WHEEL COVER LOWER NO.2
3. REMOVE STEERING WHEEL COVER LOWER NO.3
4. REMOVE HORN BUTTON ASSY
5. REMOVE STEERING WHEEL ASSY
SST 09950-50013 (09951-05010, 09952-05010, 09953-05020, 09954-05021)
6. REMOVE TILT LEVER BRACKET
7. REMOVE STEERING COLUMN COVER
8. REMOVE SPIRAL CABLE SUB-ASSY
9. REMOVE STEERING SENSOR





a) Unclamp the 6 claws and remove the steering sensor from the spiral cable.
10. INSTALL STEERING SENSOR
a) Aligning the 2 locating pins as shown in the illustration, engage the 6 claws and install the steering sensor to the spiral cable.
11. INSPECT SPIRAL CABLE SUB-ASSY
12. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
13. INSTALL SPIRAL CABLE SUB-ASSY
14. CENTER SPIRAL CABLE
15. INSTALL STEERING COLUMN COVER
16. INSTALL TILT LEVER BRACKET
17. INSTALL STEERING WHEEL ASSY
18. INSTALL HORN BUTTON ASSY
19. INSPECT HORN BUTTON ASSY
20. CONNECT BATTERY NEGATIVE TERMINAL
21. PERFORM INITIALIZATION
22. INSPECT SRS WARNING LIGHT