Ball Joint: Specifications

INSPECT LOWER BALL JOINT ASSY FRONT LH
Use a torque wrench to turn the nut continuously at a rate of 3 to 5 seconds per turn. Take the torque reading on the 5th turn.
Turning torque 0.98 to 4.90 Nm (10 to 50 kgf-cm, 8.7 to 43 inch lbs.)
Torque 71 Nm (724 kgf-cm, 52 ft. lbs.)

INSTALL FRONT SUSPENSION ARM SUB-ASSY LOWER NO.1 LH
Lower the front suspension arm sub-assy lower No.1 LH and install the lower ball joint assy front to the front suspension arm sub-assy lower No.1 LH with the bolt and the 2 nuts.
Torque 89 Nm (908 kgf-cm, 66 ft. lbs.)