Shift Selector Actuator: Service and Repair
SHIFT CONTROL ACTUATOR ASSYREPLACEMENT
1. REMOVE SHIFT CONTROL ACTUATOR ASSY
a. Disconnect the connector.
b. Remove the 3 bolts. Remove the transmission case cover from the hybrid vehicle transaxle.
c. Remove the 3 bolts. Remove the shift control actuator assy from the hybrid vehicle transaxle.
2. INSTALL SHIFT CONTROL ACTUATOR ASSY
a. Apply a small amount of ATF WS to the O-ring.
b. Install the shift control actuator assy to the hybrid vehicle transaxle using the 3 bolts.
Torque: 16 Nm (160 kgf-cm, 12 ft. lbs.)
c. Install the transmission case cover to the hybrid vehicle transaxle using the 3 bolts.
Torque: 7.0 Nm (71 kgf-cm, 62 inch lbs.)
d. Connect the connector.