Power Window Switch: Testing and Inspection
INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLYa. Remove the master switch.
b. Measure the resistance between the terminals of the connector when the switch is operated.
Standard:
c. Check the AUTO lamp master switch.
Standard:
If the result is not as specified, replace the master switch assembly.
INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY
a. Remove the power window regulator switch.
b. Measure the resistance between the terminals of the connector when the switch is operated.
Standard:
If the result is not as specified, replace the regulator switch assembly.