Pinout Values and Diagnostic Parameters
TERMINALS OF ECUTerminals Of ECM/Pinouts - Check Instrument Panel J/B Assy (Multiplex Network Body ECU):
CHECK INSTRUMENT PANEL J/B ASSY (MULTIPLEX NETWORK BODY ECU)
a. Disconnect the 2D, 2F, 2J, 2K and 2M J/B connectors.
b. Disconnect the B6, B7, B8 and B9 ECU connectors.
c. Measure the voltage and resistance of the wire harness side connectors.
Standard:
d. Reconnect the 2D, 2F, 2J, 2K and 2M J/B connectors.
e. Reconnect the B6, B7, B8 and B9 ECU connectors.
f. Measure the voltage of the connectors.
Standard: