Map Lamp: Testing and Inspection

MAP LAMP ASSY
a. Coupe:
1. Measure the resistance according to the value(s) in the table.
2. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 5, then check that the lamp comes on when the switch is in the ON position.
OK: Lamp comes on.







b. Convertible:
1. Measure the resistance according to the value(s) in the table.
2. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 2, then check that the lamp comes on when the switch is in the ON position.
OK: Lamp comes on.
3. Connect the positive (+) lead from the battery to terminal 1 and negative (-) lead to terminal 3, then check that the lamp comes on when the switch is in the DOOR position.
OK: Lamp comes on.