Illuminated Entry System Operation Check
ILLUMINATED ENTRY SYSTEM OPERATION CHECKa. Illuminated entry system controls the following lamps:
- Ignition key cylinder light (Transponder key amplifier)
- Interior light (Room lamp assy No.1)
- Map lamp assy (convertible only)
b. Check that the lamps come on after:
1. Unlocking any door that was closed and locked with the ignition switch off
c. Check that the lamps fade out after:
1. Leaving the doors unlocked for 15 seconds
2. Turning the ignition switch to the ACC or ON position
3. Locking all the doors
d. Check that the lamps stay ON for at least 15 seconds after opening any of the doors, then fade out again after 15 seconds.
e. Check that the lamps come on after:
1. Closing all the doors and turning the ignition switch from the ACC or ON position off.
f. Check that the lamps fade out after:
1. Leaving the doors unlocked for 15 seconds
2. Locking all the doors
g. Check that the lamps stay ON for at least 15 seconds after opening any of the doors, then fade out again in 15 seconds after closing all the doors.
h. Check that the lamps come on when opening any of the doors and fade out after either closing and locking them or turning the ignition switch to the ACC or ON position.