Rear Axle LH Hub Bolt Replacement

REAR AXLE LH HUB BOLT
REPLACEMENT
1. REMOVE REAR WHEEL
2. SEPARATE REAR DISC BRAKE CALIPER ASSY LH
3. REMOVE REAR DISC
4. REMOVE REAR AXLE LH HUB BOLT





a) Temporarily install the 2 nuts and 2 washers to the rear axle LH hub bolt as shown in the illustration.
b) Using SST and a hammer handle or an equivalent to hold the hub & bearing assy, remove the rear axle LH hub bolt.
SST 09628-10011
5. INSTALL REAR AXLE LH HUB BOLT





a) Install a washer and nut to a new bolt, as shown in the illustration.
b) Using a hammer handle or an equivalent to hold the hub & bearing assy, install a new rear axle LH hub bolt by tightening the nut.
6. INSTALL REAR DISC
7. INSTALL REAR DISC BRAKE CALIPER ASSY LH
8. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)