ABS (Antilock Brake System)

DIAGNOSTIC TROUBLE CODE CHART

C0200/31-C1330/35:

C1331/36-C1333/39:

NOTE: When removing parts, turn the ignition switch off.

HINT:
- If an abnormality is not found when inspecting parts, inspect the ECU and ground points for poor contact.
- If a trouble code is displayed during the DTC check, check the circuit listed for that code. For details of each code, refer to the for respective "DTC Code" in the DTC chart.
- When two or more DTCs are detected, perform circuit inspection one by one until the problem is identified.