Rear Seat Assembly (Coupe)
DISASSEMBLY1. REMOVE REAR SEAT SHOULDER BELT GUIDE RH
a. Remove the 2 screws and belt guide
2. REMOVE REAR SEATBACK LOCK CONTROL BEZEL RH
a. Remove the screw and bezel.
3. REMOVE REAR SEATBACK COVER RH
a. Lift up the seatback cover.
b. Remove the 2 bolts, rear seatback hinge RH and rear seatback hinge center.
c. Remove the rear seatback lock release button.
d. Disengage the back cover side and then turn up the rear seatback carpet.
e. Remove the hog rings and hold up the seatback frame to remove the 2 headrest supports.
f. Disengage the claw and remove the rear seatback stop button grommet.
g. Remove the rear seatback cover together with the seatback pad from the seatback frame.
h. Remove the hog rings and seatback cover.
4. REMOVE REAR SEATBACK LOCK SUB-ASSEMBLY RH
a. Remove the 2 bolts.
b. Remove the bolt and seatback lock through the service hole.
5. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY RH
6. REMOVE REAR SEATBACK LOCK CONTROL CABLE SUB-ASSEMBLY RH
7. REMOVE REAR SEAT SHOULDER BELT GUIDE CENTER
a. Remove the rear seatback lock release button.
b. Remove the 2 screws and belt guide.
8. REMOVE REAR SEAT SHOULDER BELT GUIDE LH
a. Remove the 2 screws and shoulder belt guide.
9. REMOVE REAR SEATBACK LOCK CONTROL BEZEL LH
a. Remove the screw and bezel.
10. REMOVE REAR SEATBACK COVER LH
a. Remove the 2 bolts, rear seatback hinge LH and rear seatback hinge center.
b. Lift up the seatback cover.
c. Disengage the back cover side and then turn up the rear seatback carpet.
d. Remove the hog rings and hold up the seatback frame to remove the 2 headrest supports.
e. Remove the rear seatback cover together with the seatback pad from the seatback frame.
f. Remove the hog rings and seatback cover.
11. REMOVE REAR SEAT BACK LOCK SUB-ASSEMBLY LH
a. Remove the 2 bolts.
b. Remove the bolt and seatback lock through the service hole.
12. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY LH
13. REMOVE REAR SEATBACK CONTROL CABLE SUB-ASSEMBLY LH
14. REMOVE SEAT CUSHION COVER
a. Remove the hog rings and seat cushion cover.
REASSEMBLY
1. INSTALL REAR SEAT CUSHION COVER
a. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.
NOTE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
2. INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY LH
a. Install the seatback lock with the 2 bolts.
Torque: 30 N.m (306 kgf.cm, 22 ft.lbf)
3. INSTALL REAR SEATBACK LOCK SUB-ASSEMBLY RH
a. Install the seatback lock with the 2 bolts.
Torque: 30 N.m (306 kgf.cm, 22 ft.lbf)
4. INSTALL REAR SEATBACK COVER LH
a. Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.
NOTE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
b. Install the seatback pad with cover to the seatback frame.
c. Install the 2 headrest supports.
d. Using hog ring pliers, install the seatback cover to the seatback frame with new hog rings.
NOTE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
e. Install the rear seatback hinge LH and rear seat hinge center with the 2 bolts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)
5. INSTALL REAR SEATBACK COVER RH
a. Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.
NOTE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
b. Install the seatback pad with cover to the seatback frame.
c. Install the 2 headrest supports and the rear seatback stop button grommet.
d. Using hog ring pliers, install the seatback cover to the seatback frame with new hog rings.
NOTE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
e. Install the rear seatback hinge RH and rear seat hinge center with the 2 bolts.
Torque: 18 N.m (185 kgf.cm, 13 ft.lbf)