Brake Warning Light Remains ON

Brake Warning Light Remains ON

DESCRIPTION

If any of the following is detected, the BRAKE warning light remains on:
- The skid control ECU connector is disconnected from the skid control ECU.
- The brake fluid level is insufficient.
- The parking brake is applied.
- EBD operation is not possible.

Wiring Diagram:

Step 1-3:

Step 4-5:

Step 6:

Step 7:

Step 8:

Step 9-10:

Step 10(Continued):

INSPECTION PROCEDURE

NOTE: When replacing the brake actuator assembly, perform zero point calibration. Calibration