Inspection

INSPECTION





1. INSPECT FAN NO.1 AND FAN NO.3 RELAY
(a) Check the resistance of the relay.

Resistance:

If the result is not as specified, replace the relay.





2. INSPECT FAN NO.2 RELAY
(a) Check the resistance of the relay.

Resistance:

If the result is not as specified, replace the relay.





3. INSPECT NO.1 ECT SWITCH
(a) Check the resistance.

Resistance:

If the result is not as specified, replace the switch.

NOTICE: When checking the ECT switch in the water, the terminals should be kept dry. After the check, dry the switch.





4. INSPECT NO.2 ECT SWITCH
(a) Check the resistance.

Resistance:

If the result is not as specified, replace the switch.

NOTICE: When checking the ECT switch in the water, the terminals should be kept dry. After the check, dry the switch.