Active Test

ACTIVE TEST

a. Performing the ACTIVE TEST using the intelligent tester allows the meters, indicators and so on to operate without parts removal. Performing the ACTIVE TEST as the first step in troubleshooting is one way to shorten labor time.

It is possible to display the DATA LIST on the intelligent tester during the ACTIVE TEST.

1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch to the ON position.
3. Turn the tester on.
4. Enter following menus: DIAGNOSIS / OBD/ MOBD / METER / ACTIVE TEST.







5. From the display on the tester, perform the "ACTIVE TEST".