Data List

DATA LIST

a. According to the DATA LIST displayed on the intelligent tester, you can read the values of the switches, sensors, actuators and so on without parts removal. Reading the DATA LIST as the first step in troubleshooting is one method to shorten work time.

1. Warm up the engine.
2. Turn the ignition switch off.
3. Connect the intelligent tester to the DLC3.
4. Turn the ignition switch to the ON position.
5. Turn the tester on.
6. Enter the following menus: DIAGNOSIS / OBD/MOBD / METER / DATA LIST.













7. Check the values by referring to the table.