High Mounted Stop Light Assembly (For Convertible)

High Mounted Stop Light Assembly (for Convertible):

High Mounted Stop Light Assembly (for Convertible)

REMOVAL

HINT: Installation is in the reverse order of removal.

1. REMOVE BACK BELT MOULDING




a. Remove the 5 clips and turn up the luggage compartment trim cover front.




b. Disconnect the connector.




c. Remove the 4 bolts and the grommet, and then remove the back belt moulding.

2. REMOVE CENTER STOP LIGHT ASSEMBLY




a. Remove the 4 bolts, and then remove the center stop light assembly.

INSTALLATION

1. INSTALL CENTER STOP LIGHT ASSEMBLY




a. Install the center stop light assembly with the 4 bolts.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

2. INSTALL BACK BELT MOULDING




a. Install the back belt moulding with the 4 bolts and the grommet.

Torque: 14 N.m (143 kgf.cm, 10 ft.lbf)




b. Connect the connector.




c. Install the luggage compartment trim cover front with the 5 clips.