Daytime Running Lamp Resistor: Service and Repair

Daytime Running Light Resister:

Daytime Running Light Resister

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE BATTERY 3. REMOVE BATTERY TRAY
4. REMOVE AIR CLEANER INLET ASSEMBLY (for 3MZFE)
5. REMOVE NO. 1 AIR CLEANER INLET (for 3MZ-FE)
6. REMOVE INTAKE AIR RESONATOR SUB-ASSEMBLY (for 3MZ-FE)
7. REMOVE DAYTIME RUNNING LIGHT RESISTOR




a. Disconnect the connector.
b. Remove the bolt and the daytime running light resistor.

INSTALLATION

1. INSTALL DAYTIME RUNNING LIGHT RESISTOR




a. Install the daytime running light resistor with the bolt.
b. Connect the connector.

2. INSTALL INTAKE AIR RESONATOR SUB-ASSEMBLY (for 3MZ-FE)
3. INSTALL NO. 1 AIR CLEANER INLET (for 3MZ-FE)
4. INSTALL AIR CLEANER INLET ASSEMBLY (for 3MZFE)
5. INSTALL BATTERY TRAY 6. INSTALL BATTERY
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. PERFORM INITIALIZATION

NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal.