Removal and Installation

Headlight Assembly:

Headlight Assembly:

Headlight Assembly

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for HID Headlight)
2. REMOVE FRONT FENDER LINER LH
3. REMOVE FRONT FENDER LINER RH
4. REMOVE FRONT BUMPER ASSEMBLY
5. REMOVE HEADLIGHT ASSEMBLY




a. Remove the 2 bolts, screw and clip.
b. Disconnect the connectors and remove the headlight assembly.

INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY

a. Connect the connectors.




b. Install the headlight assembly with the 2 bolts, screw and clip.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

2. INSTALL FRONT BUMPER ASSEMBLY
3. INSTALL FRONT FENDER LINER LH
4. INSTALL FRONT FENDER LINER RH
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for HID Headlight)
6. VEHICLE PREPARATION FOR HEADLIGHT AIMING ADJUSTMENT
7. PREPARATION FOR HEADLIGHT AIMING (Using a headlight aim test machine)
8. PREPARATION FOR HEADLIGHT AIMING (Using a Screen)
9. HEADLIGHT AIMING INSPECTION
10. HEADLIGHT AIMING ADJUSTMENT
11. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT
12. PREPARATION FOR FOG LIGHT AIMING
13. FOG LIGHT AIMING INSPECTION
14. FOG LIGHT AIMING ADJUSTMENT
15. PERFORM INITIALIZATION (for HID Headlight)

NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal.