Removal and Replacement

Rear Combination Light Assembly

REMOVAL

1. REMOVE REAR COMBINATION LIGHT ASSEMBLY

a. Disconnect the connector and 2 clamps.

b. Remove the 4 nuts.

c. Disengage the pin and remove the rear combination light assembly.

INSTALLATION

1. INSTALL REAR COMBINATION LIGHT ASSEMBLY

a. Engage the pin.

b. Install the rear combination light assembly with the 4 nuts.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

c. Connect the connector and 2 clamps.