Tire Pressure Monitor Receiver / Transponder: Service and Repair

TIRE PRESSURE WARNING RECEIVER (w/ Antenna)

REMOVAL
1. DISCONNECT CABLE TO NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE LH (for Coupe)
3. REMOVE REAR SEAT CUSHION ASSEMBLY (for Coupe)
4. REMOVE REAR SEATBACK ASSEMBLY (for Convertible)
5. REMOVE REAR SEATBACK ASSEMBLY (for Coupe)
6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH (for Coupe)
7. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH (for Coupe)
8. REMOVE CENTER PILLAR GARNISH LH (for Coupe)
9. REMOVE NO. 1 CUP HOLDER (for Convertible)
10. REMOVE UPPER QUARTER TRIM PANEL LH (for Convertible)
11. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH (for Coupe)





12. REMOVE UPPER QUARTER TRIM PANEL LH (for Coupe)
(a) Remove the upper quarter trim panel LH.





13. REMOVE TIRE PRESSURE WARNING RECEIVER (for Coupe)
(a) Disconnect the connector.





(b) Remove the bolt and tire pressure warning receiver from the body.
14. REMOVE TIRE PRESSURE WARNING RECEIVER (for Convertible)
(a) Disconnect the connector.
(b) Remove the nut and tire pressure warning receiver from the body.

INSTALLATION





1. INSTALL TIRE PRESSURE WARNING RECEIVER (for Coupe)
(a) Install the tire pressure warning receiver with the bolt.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
(b) Connect the connector.





2. INSTALL TIRE PRESSURE WARNING RECEIVER (for Convertible)
(a) Install the tire pressure warning receiver with the nut.
Torque: 6.0 Nm (61 kgf-cm, 53 inch lbs.)
(b) Connect the connector.





3. INSTALL UPPER QUARTER TRIM PANEL LH (for Coupe)
(a) Install the upper quarter trim panel LH.
4. INSTALL UPPER QUARTER TRIM PANEL LH (for Convertible)
5. INSTALL NO. 1 CUP HOLDER (for Convertible)
6. INSTALL INNER ROOF SIDE GARNISH ASSEMBLY LH (for Coupe)
7. INSTALL CENTER PILLAR GARNISH LH (for Coupe)
8. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH (for Coupe)
9. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH (for Coupe)
10. INSTALL REAR SEATBACK ASSEMBLY (for Coupe)
11. INSTALL REAR SEATBACK ASSEMBLY (for Convertible)
12. INSTALL REAR SEAT CUSHION ASSEMBLY (for Coupe)
13. INSTALL FRONT DOOR SCUFF PLATE LH (for Coupe)
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
15. PERFORM INITIALIZATION Initialization
Some systems need initialization after reconnecting the cable to the negative battery terminal
16. INSPECT TIRE PRESSURE WARNING SYSTEM