Ignition Switch: Service and Repair

Ignition Switch:

Ignition Switch:

Ignition Switch

REMOVAL

1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE INSTRUMENT PANEL FINISH LOWER PANEL LH
3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY




a. Disconnect the ignition switch connector and unlock warning switch connector.
b. Remove the clamp.
c. Remove the 2 screws and ignition switch.

INSTALLATION

1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY
2. INSTALL INSTRUMENT PANEL FINISH LOWER PANEL LH
3. CONNECT BATTERY NEGATIVE TERMINAL
4. PERFORM INITIALIZATION