Remote Switch: Service and Repair

Steering Pad Switch:

Steering Pad Switch

REMOVAL

1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE NO. 2 LOWER STEERING WHEEL COVER
3. REMOVE NO. 3 LOWER STEERING WHEEL COVER
4. REMOVE STEERING PAD
5. REMOVE STEERING PAD SWITCH ASSEMBLY




a. Disconnect the pad switch connector from the spiral cable.
b. Disengage the clamp and remove the screw.
c. Disengage the 2 pins and remove the steering pad switch.




d. Disengage the clamp and remove the screw.
e. Disengage the 2 pins and remove the steering pad switch assembly.

INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY




a. Engage the 2 pins and install the steering pad switch assembly.
b. Install the screw and engage the clamp.

Torque: 2.4 N.m (24 kgf.cm, 21 in.lbf)




c. Engage the 2 pins and install the steering pad switch assembly.
d. Install the screw and engage the clamp.

Torque: 2.4 N.m (24 kgf.cm, 21 in.lbf)

e. Connect the connector to the spiral cable.

2. INSTALL STEERING PAD
3. INSTALL NO. 3 LOWER STEERING WHEEL COVER
4. INSTALL NO. 2 LOWER STEERING WHEEL COVER
5. CONNECT BATTERY NEGATIVE TERMINAL
6. PERFORM INITIALIZATION
7. INSPECT STEERING PAD
8. INSPECT SRS WARNING LIGHT