Front Suspension Lower No. 1 Arm
FRONT SUSPENSION LOWER NO. 1 ARMCOMPONENTS (Part 1):
COMPONENTS (Part 2):
REMOVAL
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (3MZ-FE ENGINE TYPE)
2. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (2AZ-FE ENGINE TYPE)
3. REMOVE TRANSVERSE ENGINE MOUNTING INSULATOR (AUTOMATIC TRANSAXLE)
(a) Remove the 3 nuts and transverse engine mounting insulator.
4. REMOVE TRANSVERSE ENGINE MOUNTING INSULATOR (MANUAL TRANSAXLE)
(a) Remove the 3 nuts and transverse engine mounting insulator.
(b) Remove the 4 bolts and bracket from the manual transmission.
5. REMOVE FRONT SUSPENSION NO.1 LOWER ARM SUBASSEMBLY
(a) Remove the 2 bolts on the front side of the front suspension arm subassembly lower No. 1 LH.
(b) Remove the bolt and nut on the rear side of the front suspension arm subassembly lower No. 1 LH.
(c) Remove the front suspension arm subassembly lower No. 1 LH.
(d) Remove the front lower arm bush stopper from the front suspension arm subassembly lower No. 1 LH.
INSTALLATION
1. INSTALL FRONT SUSPENSION NO.1 LOWER ARM SUBASSEMBLY
(a) Install the front lower arm bush stopper to the front suspension arm subassembly lower No. 1 LH.
(b) Install the 2 bolts on the front side of the front suspension arm subassembly lower No. 1 LH.
Torque: 200 Nm (2,040 kgf-cm, 148 ft. lbs.)
(c) Install the bolt and nut on the rear side of the front suspension arm subassembly lower No. 1 LH.
Torque: 206 Nm (2,100 kgf-cm, 152 ft. lbs.)
2. INSTALL TRANSVERSE ENGINE MOUNTING INSULATOR (AUTOMATIC TRANSAXLE)
(a) Install the transverse engine mounting insulator with the 3 nuts.
Torque: 87 Nm (887 kgf-cm, 64 ft. lbs.)
3. INSTALL TRANSVERSE ENGINE MOUNTING INSULATOR (MANUAL TRANSAXLE)
(a) Install the bracket to the manual transmission with the 4 bolts.
Torque: 64 Nm (653 kgf-cm, 47 ft. lbs.)
(b) Install the transverse engine mounting insulator with the 3 nuts.
Torque: 87 Nm (887 kgf-cm, 64 ft. lbs.)
4. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE