Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMC Made) Removal

5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMMK Made) Removal

6. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) Removal

7. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) Removal

8. REMOVE TIRE PRESSURE WARNING RESET SWITCH






(a) Disengage the 2 claws and remove the tire pressure warning reset switch from the lower instrument panel sub-assembly.