Installation

DOOR LOCK: UNLOCK WARNING SWITCH:

COMPONENTS














DOOR LOCK: UNLOCK WARNING SWITCH:

INSTALLATION

1. INSTALL UNLOCK WARNING SWITCH ASSEMBLY





(a) Engage the 2 claws to install the unlock warning switch assembly to the steering lock sub-assembly.
2. INSTALL IGNITION SWITCH LOCK CYLINDER ASSEMBLY (Reassembly)

3. INSPECT STEERING LOCK OPERATION
4. INSTALL STEERING COLUMN UPPER WITH SWITCH BRACKET ASSEMBLY (Reassembly)

5. INSTALL TRANSPONDER KEY AMPLIFIER (Reassembly)

6. INSTALL STEERING COLUMN ASSEMBLY (Installation)

7. INSTALL NO. 1 AIR DUCT (Installation)

8. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
9. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY (Installation)

10. INSTALL STEERING COLUMN COVER (Installation)

11. ADJUST SPIRAL CABLE SUB-ASSEMBLY (Installation)

12. INSTALL STEERING WHEEL ASSEMBLY (Installation)

13. INSPECT STEERING WHEEL CENTER POINT
14. INSPECT STEERING PAD (Installation)

15. INSTALL STEERING PAD (Installation)

16. INSTALL LOWER NO. 2 STEERING WHEEL COVER
17. INSTALL LOWER NO. 3 STEERING WHEEL COVER
18. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (Installation)

19. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH (Installation)

20. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (Installation)

21. INSTALL FRONT DOOR SCUFF PLATE LH (Installation)

22. INSTALL FRONT WHEEL LH (Installation)

23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
24. INSPECT SRS WARNING LIGHT
(Diagnosis System)