Installation

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH:

INSTALLATION

1. INSTALL CRUISE CONTROL MAIN SWITCH





(a) Install the cruise control main switch with the 2 screws.
Torque: 2.4 Nm (24 kgf-cm, 21 in-lbf)
(b) Connect the connector.
2. INSTALL STEERING PAD (Installation)

3. INSTALL LOWER NO. 2 STEERING WHEEL COVER (Installation)

4. INSTALL LOWER NO. 3 STEERING WHEEL COVER (Installation)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT SRS WARNING LIGHT
(Diagnosis System)