Installation

LIGHTING: HEADLIGHT ASSEMBLY:

INSTALLATION

1. INSTALL HEADLIGHT ASSEMBLY
(a) Connect the connectors.





(b) Install the headlight assembly with the bolt and 2 screws.
Torque: 3.6 Nm (37 kgf-cm, 32 in-lbf)
2. INSTALL FRONT BUMPER ASSEMBLY (w/o Fog Light) (Installation)

3. INSTALL FRONT BUMPER ASSEMBLY (w/ Fog Light) (Installation)

4. INSTALL COOL AIR INTAKE DUCT SEAL (for 2GR-FE) (Installation)

5. VEHICLE PREPARATION FOR HEADLIGHT AIM ADJUSTMENT (Adjustments)

6. PREPARATION FOR HEADLIGHT AIMING (Using a tester) (Adjustments)

7. PREPARATION FOR HEADLIGHT AIMING (Using a screen) (Adjustments)

8. HEADLIGHT AIMING INSPECTION (Adjustments)

9. HEADLIGHT AIMING ADJUSTMENT (Adjustments)

10. VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT (w/ Fog Light) (Adjustments)

11. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) (Adjustments)

12. FOG LIGHT AIMING INSPECTION (w/ Fog Light) (Adjustments)

13. FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light) (Adjustments)