Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY:

REMOVAL

1. PRECAUTION

CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing (Service Precautions).

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) (Removal)

4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) (Removal)

5. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH (Removal)

6. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH (Removal)

7. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle) (Removal)

8. REMOVE UPPER CONSOLE PANEL (for Manual Transaxle) (Removal)

9. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle) (Removal)

10. REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle) (Removal)

11. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (Removal)

12. REMOVE FRONT DOOR SCUFF PLATE LH (Removal)

13. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (Removal)

14. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (Removal)

15. REMOVE FRONT DOOR SCUFF PLATE RH (Removal)

16. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (Removal)

17. REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY (Removal)

18. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (Removal)

19. REMOVE CONSOLE BOX POCKET (Removal)

20. REMOVE CONSOLE BOX CARPET (Removal)

21. REMOVE CONSOLE BOX ASSEMBLY (Removal)

22. REMOVE NO. 1 CONSOLE BOX INSERT FRONT (Removal)

23. REMOVE NO. 2 CONSOLE BOX INSERT FRONT (Removal)

24. REMOVE NO. 1 CONSOLE BOX DUCT (for Automatic Air Conditioning System) (Removal)

25. REMOVE CENTER AIRBAG SENSOR ASSEMBLY
(a) Turn back the carpet.





(b) Disconnect the holder (with connectors).
(c) Remove the 3 bolts and center airbag sensor assembly.