Installation

BRAKE CONTROL: STEERING ANGLE SENSOR (w/ VSC):

INSTALLATION

1. INSTALL STEERING ANGLE SENSOR





(a) Align the locating pins, engage the claws, and install the steering angle sensor to the spiral cable.
2. INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR (Installation)

3. INSTALL STEERING COLUMN COVER (Installation)

4. ADJUST SPIRAL CABLE (Installation)

5. INSTALL STEERING WHEEL ASSEMBLY (Installation)

6. INSPECT STEERING WHEEL CENTER POINT (Installation)

7. INSTALL STEERING PAD (Installation)

8. INSTALL NO. 2 STEERING WHEEL COVER LOWER (Installation)

9. INSTALL NO. 3 STEERING WHEEL COVER LOWER (Installation)

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11. INSPECT STEERING PAD (Steering Pad)

12. INSPECT SRS WARNING LIGHT

HINT: (Diagnosis System)