Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE RH (Removal)

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (Removal)

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (Removal)

5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) (Removal)

6. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) (Removal)

7. REMOVE TIRE PRESSURE WARNING RESET SWITCH





(a) Disengage the 2 claws and remove the tire pressure warning reset switch from the lower instrument panel sub-assembly.