Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU:

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU





(a) Connect the connector to the tire pressure warning ECU.
(b) Install the tire pressure warning ECU with the nut.
Torque: 7.5 Nm (77 kgf-cm, 66 in-lbf)
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) (Installation)

3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) (Installation)

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (Installation)

5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (Installation)

6. INSTALL FRONT DOOR SCUFF PLATE RH (Installation)

7. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL
8. REGISTER TRANSMITTER ID

HINT: (Registration)

9. INITIALIZE SYSTEM

NOTICE:
- Be sure to register the transmitter IDs of all tires including the grand spare tire in the ECU before initialization.
- Be sure to inflate all tires including the grand spare tire to the proper inflation pressure before initialization.

HINT: (Initialization)

10. INSPECT TIRE PRESSURE WARNING SYSTEM

HINT: (Test Mode Procedure)