Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU:

REMOVAL

NOTE: Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for re-registration of transmitter IDs (Registration).

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE RH (Removal)

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (Removal)

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (Removal)

5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) (Removal)

6. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) (Removal)

7. REMOVE TIRE PRESSURE WARNING ECU





(a) Remove the nut.
(b) Disconnect the connector and remove the tire pressure warning ECU.