Parking Brake System: Adjustments

PARKING BRAKE: PARKING BRAKE SYSTEM: ADJUSTMENT

ADJUSTMENT

1. REMOVE REAR WHEEL
2. ADJUST REAR DRUM BRAKE SHOE CLEARANCE (for TMC Made)
(a) Adjust the brake shoe clearance (Rear Drum Brake (for TMC Made)).
3. ADJUST REAR DRUM BRAKE SHOE CLEARANCE (for TMMC Made)
(a) Adjust the brake shoe clearance (Rear Drum Brake (for TMMC Made)).
4. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft-lbf)
5. INSPECT PARKING BRAKE LEVER TRAVEL
(a) Pull the parking brake lever to the fully applied position, and count the number of clicks.
Parking brake lever travel:
6 to 9 clicks at 196 N (20 kgf, 44.1 lbf)
6. ADJUST PARKING BRAKE LEVER TRAVEL
(a) Remove the rear console box sub-assembly (Removal).





(b) Loosen the lock nut and turn the adjusting nut until the lever travel turns correct.
(c) Tighten the lock nut.
Torque: 5.0 Nm (55 kgf-cm, 44 in-lbf)
(d) Install the rear console box sub-assembly (Installation).