Reassembly

A245E AUTOMATIC TRANSAXLE: ONE-WAY CLUTCH: REASSEMBLY

REASSEMBLY

1. INSTALL NO. 2 1 WAY CLUTCH





(a) Install the No. 2 1 way clutch into the 1 way clutch outer race, facing the flange side of the No. 2 1 way clutch toward the shiny side of the 1 way clutch outer race.
2. INSTALL NO. 2 1 WAY CLUTCH HOLE SNAP RING





(a) Using a screwdriver, install the 2 No. 2 1 way clutch hole snap rings to the 1 way clutch outer race.
3. INSTALL 1 WAY CLUTCH OUTER RACE HOLE SNAP RING
(a) Using a screwdriver, install the No. 2 1 way clutch hole snap ring to the 1 way clutch outer race.
4. INSTALL REAR PLANETARY GEAR ASSEMBLY





(a) Install the rear planetary gear assembly in to the No. 2 1 way clutch, facing the inner race of the planetary gear toward the back side of the 1 way clutch outer race.
5. INSPECT NO. 2 1 WAY CLUTCH (One-Way Clutch)