Installation

LIGHTING: HEADLIGHT DIMMER SWITCH:

INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY





(a) Insert the headlight dimmer switch assembly so that its recessed portion matches that of the steering column shaft.





(b) Install the headlight dimmer switch with the band clamp and claw.
(c) Connect the connectors.
2. INSTALL WIPER AND WASHER SWITCH ASSEMBLY (Removal)

3. INSTALL SPIRAL CABLE SUB-ASSEMBLY (Installation)

4. INSTALL STEERING COLUMN COVER (Installation)

5. ADJUST SPIRAL CABLE SUB-ASSEMBLY (Installation)

6. INSPECT STEERING WHEEL CENTER POINT (Installation)

7. INSTALL STEERING WHEEL ASSEMBLY (Installation)

8. INSTALL STEERING PAD ASSEMBLY (Installation)

9. INSTALL NO. 3 STEERING WHEEL COVER LOWER
10. INSTALL NO. 2 STEERING WHEEL COVER LOWER
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. INSPECT STEERING PAD ASSEMBLY (Installation)

13. CHECK SRS WARNING LIGHT (Installation)

14. PERFORM INITIALIZATION
(a) Perform initialization (Repair Instruction - Initialization).

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.