Installation

1NZ-FXE ENGINE CONTROL SYSTEM: MASS AIR FLOW METER:

INSTALLATION





1. INSTALL MASS AIR FLOW METER
(a) Install a new O-ring to the MAF meter.
(b) Install the MAF meter with the 2 screws.
(c) Connect the MAF meter connector.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. INSTALL RADIATOR SUPPORT OPENING COVER (Installation)

4. PERFORM INITIALIZATION
(a) Perform initialization (Repair Instruction - Initialization).

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.