Installation

1NZ-FXE STARTING: POWER SWITCH:

INSTALLATION

1. INSTALL POWER SWITCH
(a) Install the power switch to the upper finish panel.
2. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (Installation)

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (Installation)

4. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (Installation)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (Installation)

6. INSTALL REAR NO. 3 FLOOR BOARD (Installation)

7. INSTALL REAR DECK FLOOR BOX (Installation)

8. INSTALL REAR NO. 2 FLOOR BOARD (Installation)

9. PERFORM INITIALIZATION
(a) Perform initialization (Repair Instruction - Initialization).

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.