Removal

1NZ-FXE STARTING: POWER SWITCH:

REMOVAL

1. REMOVE REAR NO. 2 FLOOR BOARD (Removal)

2. REMOVE REAR DECK FLOOR BOX (Removal)

3. REMOVE REAR NO. 3 FLOOR BOARD (Removal)

4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

5. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (Removal)

6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (Removal)

7. REMOVE UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (Removal)

8. REMOVE POWER SWITCH





(a) Push the 2 claws and then remove the power switch.