Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

2. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (Removal)

3. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER (Removal)

4. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY UPPER (Removal)

5. REMOVE NO.3 INSTRUMENT PANEL REGISTER ASSEMBLY (Removal)

6. REMOVE NO.4 INSTRUMENT PANEL REGISTER ASSEMBLY (Removal)

7. REMOVE NO.2 INSTRUMENT PANEL REGISTER ASSEMBLY (Removal)

8. REMOVE MULTI-DISPLAY ASSEMBLY
(a) Remove the multi-display (Removal).





9. REMOVE TIRE PRESSURE WARNING ECU
(a) Disconnect the connector.
(b) Remove the bolt and ECU.