Installation

BRAKE CONTROL: STEERING ANGLE SENSOR:

INSTALLATION

1. INSTALL STEERING ANGLE SENSOR





(a) Align the locating pins, attach the 6 claws and install the sensor to the spiral cable.
2. INSPECT SPIRAL CABLE SUB-ASSEMBLY (Testing and Inspection)

3. INSTALL SPIRAL CABLE SUB-ASSEMBLY (Installation)

4. INSTALL STEERING COLUMN COVER (Installation)

5. POSITION SPIRAL CABLE (Installation)

6. INSTALL TILT LEVER BRACKET (Installation)

7. INSPECT STEERING WHEEL CENTER POINT (Installation)

8. INSTALL STEERING WHEEL ASSEMBLY (Installation)

9. INSTALL STEERING PAD ASSEMBLY (Installation)

10. INSPECT STEERING PAD ASSEMBLY
(a) Inspect the steering pad (Steering Pad).
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

12. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light (Check Mode Procedure).