Removal

BRAKE CONTROL: STEERING ANGLE SENSOR:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

2. REMOVE NO. 2 STEERING WHEEL COVER LOWER
3. REMOVE NO. 3 STEERING WHEEL COVER LOWER
4. REMOVE STEERING PAD ASSEMBLY (Removal)

5. REMOVE STEERING WHEEL ASSEMBLY (Removal)

6. REMOVE TILT LEVER BRACKET (Removal)

7. REMOVE STEERING COLUMN COVER (Removal)

8. REMOVE SPIRAL CABLE SUB-ASSEMBLY (Removal)

9. REMOVE STEERING ANGLE SENSOR





(a) Detach the 6 claws and remove the sensor from the spiral cable.