Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

2. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (Removal)

3. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER (Removal)

4. REMOVE TIRE PRESSURE WARNING RESET SWITCH





(a) Disengage the 2 claws and remove the tire pressure warning reset switch from the instrument panel finish panel sub-assembly lower.