Installation

WIPER AND WASHER: WIPER SWITCH:

INSTALLATION





1. INSTALL WIPER AND WASHER SWITCH
(a) Attach the claw to install the wiper switch.
(b) Connect the connector.
2. INSTALL STEERING COLUMN COVER (Installation)

3. INSTALL TILT LEVER BRACKET (Installation)

4. INSTALL SPIRAL CABLE SUB-ASSEMBLY (Installation)

5. INSTALL STEERING WHEEL ASSEMBLY (Installation)

6. INSTALL NO. 2 STEERING WHEEL COVER LOWER
7. REMOVE NO. 3 STEERING WHEEL COVER LOWER
8. INSTALL STEERING PAD ASSEMBLY (Installation)

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. INSPECT STEERING PAD ASSEMBLY (Installation)

11. CHECK SRS WARNING LIGHT (Installation)

12. PERFORM INITIALIZATION
(a) Perform initialization (Repair Instruction - Initialization).

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.