Front Door Speaker

FRONT DOOR SPEAKER:

ON-VEHICLE INSPECTION

1. INSPECT FRONT NO. 1 SPEAKER

HINT: Remove interior parts so that the front No. 1 speaker can be seen.

(a) Check the speaker installation.
OK:
The speaker is securely installed.
If the result is not as specified, reinstall the front No. 1 speaker.
(b) Visually check the speaker.
OK:
The cone paper of the speaker is not torn.
(c) Speaker resistance check.
(1) Disconnect the front No. 1 speaker connector.
(2) Measure the resistance between the terminals of the speaker.
Standard resistance:
Separate Type Amplifier System (Coupe)
3 to 4 Ohms
Separate Type Amplifier System (Convertible)
4 to 6 Ohms
Built-in Type Amplifier System
3.2 to 4.8 Ohms
If the result is not as specified, replace the front No. 1 speaker.