Disassembly

EXTERIOR: REAR BUMPER:

COMPONENTS









DISASSEMBLY

1. REMOVE LICENSE PLATE LIGHT ASSEMBLY (Removal)

2. REMOVE BACK UP LIGHT ASSEMBLY LH (Removal)

3. REMOVE BACK UP LIGHT ASSEMBLY RH

HINT: Use the same procedures for the RH side and LH side.

4. REMOVE REAR BUMPER BAR REINFORCEMENT CENTER





(a) Remove the rear bumper bar reinforcement center from the rear bumper energy absorber.
5. REMOVE REAR BUMPER ENERGY ABSORBER





(a) Disengage the 2 claws and remove the rear bumper energy absorber.
6. REMOVE REAR BUMPER PAD LH





(a) Remove the rear bumper pad LH from the rear bumper side retainer LH.
7. REMOVE REAR BUMPER PAD RH

HINT: Use the same procedures for the RH side and LH side.

8. REMOVE REAR BUMPER SIDE RETAINER LH





(a) Remove the 3 screws and the rear bumper side retainer LH.
9. REMOVE REAR BUMPER SIDE RETAINER RH

HINT: Use the same procedures for the RH side and LH side.

10. REMOVE REAR BUMPER SIDE SUPPORT LH





(a) Remove the screw and the rear bumper side support LH.
11. REMOVE REAR BUMPER SIDE SUPPORT RH

HINT: Use the same procedures for the RH side and LH side.

12. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY (for Coupe)





(a) Remove the 6 nuts and rear bumper reinforcement sub-assembly.
13. REMOVE FRAME DYNAMIC DAMPER (for Convertible)





(a) Remove the 4 bolts and frame dynamic damper.
14. REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY (for Convertible)





(a) Remove the 6 nuts and rear bumper reinforcement sub-assembly.