Reassembly

EXTERIOR: REAR BUMPER:

COMPONENTS









REASSEMBLY

1. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY (for Convertible)





(a) Install the rear bumper reinforcement sub-assembly with the 6 nuts.
Torque: 55 Nm (560 kgf-cm, 41 ft-lbf)
2. INSTALL FRAME DYNAMIC DAMPER (for Convertible)





(a) Install the frame dynamic damper with the 4 bolts.
3. INSTALL REAR BUMPER REINFORCEMENT SUB-ASSEMBLY (for Coupe)





(a) Install the rear bumper reinforcement sub-assembly with the 6 nuts.
Torque: 55 Nm (560 kgf-cm, 41 ft-lbf)
4. INSTALL REAR BUMPER SIDE SUPPORT LH





(a) Install the rear bumper side support LH with the screw.
5. INSTALL REAR BUMPER SIDE SUPPORT RH

HINT: Use the same procedures for the RH side and LH side.

6. INSTALL REAR BUMPER SIDE RETAINER LH





(a) Install the rear bumper side retainer LH with the screws.
7. INSTALL REAR BUMPER SIDE RETAINER RH

HINT: Use the same procedures for the RH side and LH side.

8. INSTALL REAR BUMPER PAD LH





(a) Install the rear bumper pad.
9. INSTALL REAR BUMPER PAD RH

HINT: Use the same procedures for the RH side and LH side.

10. INSTALL REAR BUMPER ENERGY ABSORBER





(a) Engage the 2 claws and install the rear bumper energy absorber.
11. INSTALL REAR BUMPER BAR REINFORCEMENT CENTER





(a) Install the rear bumper bar reinforcement center on the rear bumper energy absorber.
12. INSTALL BACK UP LIGHT ASSEMBLY LH (Installation)

13. INSTALL BACK UP LIGHT ASSEMBLY RH

HINT: Use the same procedures for the RH side and LH side.

14. INSTALL LICENSE PLATE LIGHT ASSEMBLY